Rolling Machine Series
Industrial Rollmaschine Lösungen
KAVDO plate rolling machines handle cylindrical, conical and curved forming with precision. Available in three-roll, four-roll, asymmetric and profile bending configurations to match your production requirements.
3-Roll
01 — Three Roll
Dreiwalzen-Rundstiermaschine
Hydraulic three-roll plate bending machine with symmetric or asymmetric roller configuration. The upper roll adjusts vertically to control bending radius while two lower rolls drive the plate through the machine. Suitable for rolling cylinders, cones and arc shapes from mild steel and stainless steel plate.
- Rolling Thickness: up to 50 mm
- Rolling Width: up to 3000 mm
- Top Roll: Hydraulic Adjustable
- Drive: Hydraulic Motor
4-Roll CNC
02 — Four Roll
Vierwalzen-Rundbiegemaschine
CNC four-roll plate bending machine with pre-bending capability in a single pass. The top roll and two side rolls are independently adjustable, eliminating the need to flip the plate for edge pre-bending. Provides higher precision, faster cycle times and reduced operator skill requirements compared to three-roll models.
- Rolling Thickness: up to 60 mm
- Rolling Width: up to 4000 mm
- Pre-Bending: Single-Pass
- Control: CNC Programmable
Section Bending
03 — Profile Bending
Profilbiegemaschine
Hydraulic profile bending machine for curving steel sections including angle iron, channel steel, I-beam, flat bar, round tube, square tube and special profiles. Three-roll horizontal or vertical configuration with interchangeable tooling to accommodate a wide range of cross-sections and bending radii.
- Profile Range: Angle / Channel / Tube / Beam
- Max Section: up to 200×200 mm
- Rolls: 3-Roll Horizontal / Vertical
- Tooling: Interchangeable Sets
Asymmetric
04 — Asymmetric
Asymmetrische Blechbiegemaschine
Three-roll asymmetric plate rolling machine with the lower front roll offset to allow direct plate feeding without manual pre-bending. This simplified workflow reduces setup time and operator effort, making it an economical choice for workshops producing standard cylinders and curved panels in medium-thickness sheet metal.
- Rolling Thickness: up to 30 mm
- Rolling Width: up to 2500 mm
- Configuration: Asymmetric 3-Roll
- Feed: Direct Plate Entry
Loslegen
Starten Sie Ihr Projekt heute mit KAVDO
Erhalten Sie innerhalb von 24 Stunden professionelle Beratung und wettbewerbsfähige Preise. Erzählen Sie uns von Ihren Anforderungen und unser Team bereitet eine maßgeschneiderte Lösung für Sie vor.
- Antwort innerhalb von 24 Stunden
- Kostenlose technische Beratung & Angebot
- Präsenz in über 80 Ländern weltweit
Angebot anfordern
Füllen Sie das unten stehende Formular aus und wir werden uns in Kürze bei Ihnen melden.