Rolling Machine Series
Industrial آلة لف حلول
KAVDO plate rolling machines handle cylindrical, conical and curved forming with precision. Available in three-roll, four-roll, asymmetric and profile bending configurations to match your production requirements.
3-Roll
01 — Three Roll
ماكنة لف ألواح بثلاث دحرجات
Hydraulic three-roll plate bending machine with symmetric or asymmetric roller configuration. The upper roll adjusts vertically to control bending radius while two lower rolls drive the plate through the machine. Suitable for rolling cylinders, cones and arc shapes from mild steel and stainless steel plate.
- Rolling Thickness: up to 50 mm
- Rolling Width: up to 3000 mm
- Top Roll: Hydraulic Adjustable
- Drive: Hydraulic Motor
4-Roll CNC
02 — Four Roll
ماكينة ثني ألواح ذات أربع أسطوانات
CNC four-roll plate bending machine with pre-bending capability in a single pass. The top roll and two side rolls are independently adjustable, eliminating the need to flip the plate for edge pre-bending. Provides higher precision, faster cycle times and reduced operator skill requirements compared to three-roll models.
- Rolling Thickness: up to 60 mm
- Rolling Width: up to 4000 mm
- Pre-Bending: Single-Pass
- Control: CNC Programmable
Section Bending
03 — Profile Bending
آلة ثني القطع الجانبية
Hydraulic profile bending machine for curving steel sections including angle iron, channel steel, I-beam, flat bar, round tube, square tube and special profiles. Three-roll horizontal or vertical configuration with interchangeable tooling to accommodate a wide range of cross-sections and bending radii.
- Profile Range: Angle / Channel / Tube / Beam
- Max Section: up to 200×200 mm
- Rolls: 3-Roll Horizontal / Vertical
- Tooling: Interchangeable Sets
Asymmetric
04 — Asymmetric
آلة لف الألواح غير المتماثلة
Three-roll asymmetric plate rolling machine with the lower front roll offset to allow direct plate feeding without manual pre-bending. This simplified workflow reduces setup time and operator effort, making it an economical choice for workshops producing standard cylinders and curved panels in medium-thickness sheet metal.
- Rolling Thickness: up to 30 mm
- Rolling Width: up to 2500 mm
- Configuration: Asymmetric 3-Roll
- Feed: Direct Plate Entry
ابدأ
ابدأ مشروعك مع كيفدو اليوم
احصل على استشارة مهنية وأسعار تنافسية خلال 24 ساعة. أخبرنا بمتطلباتك وسيقوم فريقنا بإعداد حل مخصص لك.
- الرد خلال 24 ساعة
- استشارة فنية مجانية وتقديم عرض سعر
- نخدم أكثر من 80 دولة حول العالم
اطلب عرض سعر
املأ النموذج أدناه وسنرد عليك قريباً.