Power Press Series
Mechanical Inclinable Power Press
C-frame inclinable power press for precision stamping, punching, blanking and bending. Rigid cast-iron frame tilts up to 30° for gravity-assisted part ejection — boosting production speed while keeping the die area clean. Available from 10 to 250 tons with pneumatic clutch & brake.
- Tonnage Range 10 – 250 Tons
- Stroke Rate up to 120 SPM
- Frame Inclines 0° – 30°
- Pneumatic Clutch & Brake
Hot Sale
15+
Years Experience
80+
Countries Served
5000+
Presses Delivered
CE&ISO
Certified Quality
Product Overview
C-Frame Inclinable Design. Built for High-Volume Stamping.
The KAVDO Inclinable Power Press (J23 / JH21 Series) features a one-piece cast-iron C-frame with three-sided access. The frame tilts up to 30° so parts and scrap fall freely by gravity — no air-blow or mechanical ejection needed.
Precision-ground crankshaft drive delivers up to 120 SPM. Dry pneumatic clutch & brake engages and stops within milliseconds for rapid, safe cycling.
- One-piece cast-iron C-frame with inclinable capability up to 30°
- Dry pneumatic clutch & brake for fast, safe engagement and stopping
- Adjustable stroke length, slide adjustment and shut height for die flexibility
- Six-sided rectangular slide guide for precision and anti-deflection
- Dual safety valves, photoelectric guards and overload protection standard
Performance Highlights
Key Advantages
The KAVDO inclinable power press combines proven mechanical stamping technology with modern safety features and user-friendly operation — delivering high-volume precision forming at industry-leading value.
Gravity-Assisted Ejection
Frame tilts up to 30° so parts and scrap slide out by gravity — no blow-off needed. Keeps the die clean and boosts output by 15–25%.
High Stroke Speed
Crankshaft and helical gear drive deliver 35–120 SPM with consistent energy at every stroke — ideal for progressive die and transfer press applications.
Comprehensive Safety System
Dual solenoid valves, emergency stops, hydraulic overload protection and optional light curtains exceed CE and OSHA standards.
Versatile Die Compatibility
Adjustable stroke and slide accommodate various die heights. Accepts single-station and progressive dies with optional hydraulic clamps for quick changeover.
Pneumatic Clutch & Brake
Dry pneumatic clutch & brake with <50 ms response time. Crisp engagement, precise stopping and zero oil contamination for reliable operation.
Exceptional Value
Lowest cost per stroke for light-to-medium stamping. Simple architecture means fewer components, lower maintenance and longer service life.
Need Help Choosing the Right Press Tonnage?
Our engineers will assess your stamping requirements — material type, sheet thickness, die configuration and production cycle — to recommend the optimal inclinable power press model for your operation.
Model Range
Inclinable Power Press Models
Full model range spanning the J23 (standard) and J21 (economy) series. Select the tonnage and configuration that matches your stamping requirements.
| Parameter | J23-10T | J23-25T | J23-63T | J21-80T | J21-125T | J21-200T |
|---|---|---|---|---|---|---|
| Nominal Force (KN) | 100 | 250 | 630 | 800 | 1250 | 2000 |
| Slide Stroke (mm) | 50 | 70 | 100 | 115 | 130 | 140 |
| Number of Stroke (Times/min) | 140 | 70 | 50 | 45 | 40 | 35 |
| Closed Height (mm) | 160 | 290 | 370 | 390 | 440 | 490 |
| Max. Die Set Height (mm) | 110 | 200 | 260 | 260 | 270 | 350 |
| Die Height Adjustment (mm) | 40 | 50 | 60 | 80 | 100 | 100 |
| Throat Depth (mm) | 130 | 180 | 260 | 285 | 400 | 350 |
| Table Size – Front & Back (mm) | 210 | 320 | 460 | 500 | 610 | 700 |
| Table Size – Left & Right (mm) | 350 | 525 | 700 | 760 | 960 | 1100 |
| Mold Handle Hole Diameter (mm) | 30 | 40 | 60 | 60 | 60 | 70 |
| Mold Handle Hole Depth (mm) | 50 | 60 | 80 | 80 | 80 | 80 |
| Slide Bottom – Front & Back (mm) | 100 | 170 | 260 | 260 | 340 | 340 |
| Slide Bottom – Left & Right (mm) | 140 | 260 | 400 | 400 | 510 | 540 |
| Column Distance (mm) | 180 | 240 | 320 | 320 | 400 | 410 |
| Thickness of Table (mm) | 35 | 40 | 85 | 90 | 95 | 110 |
| Motor (KW) | 1.1 | 2.2 | 5.5 | 7.5 | 11 | 18.5 |
| Overall Length (mm) | 900 | 1200 | 1710 | 1790 | 1950 | 2400 |
| Overall Width (mm) | 550 | 850 | 1250 | 1320 | 1500 | 1750 |
| Overall Height (mm) | 1550 | 2450 | 2500 | 2550 | 2850 | 3450 |
* Specifications are subject to change without prior notice. Custom configurations available upon request. Contact our engineering team for detailed technical drawings and foundation plans.
Core Components
Machine Structure
Precision-engineered with heavy-duty cast-iron construction, high-accuracy crankshaft drive and advanced pneumatic clutch system — built for decades of reliable high-speed stamping production.
-
1
Cast-Iron C-Frame Body
One-piece cast iron frame with FEA-optimized ribs for minimal deflection. Pivots on reinforced hinge for 0°–30° inclination.
-
2
Crankshaft Drive System
Forged alloy steel crankshaft with helical gear transmission and forced lubrication. Flywheel ensures consistent force delivery at high stroke rates.
-
3
Pneumatic Clutch & Brake
Dry pneumatic clutch & brake on crankshaft. Engages and stops within 50 ms — supports single-stroke, continuous and inching modes.
-
4
Slide (Ram) Assembly
Six-sided rectangular slide with precision gibs for zero lateral play. Motorized slide adjustment and bottom knockout bar standard.
-
5
Hydraulic Overload Protector
Auto-releases pressure when tonnage exceeds rated capacity, protecting crankshaft and die. Auto-reset for immediate restart.
-
6
Electrical Control System
PLC-based control with cam controller. Optional HMI, stroke counter, tonnage monitor and auto-feeder interface.
Customize Your Machine
Optional Equipment
Tailor your inclinable power press with a wide range of optional accessories to maximize efficiency, safety and stamping capability for your specific application.
Platform
Worktable
Heavy-duty bolster plate and T-slot worktable providing a rigid, precision-ground mounting surface for secure die installation and accurate part positioning.
- Precision-ground flat surface
- T-slot pattern for flexible die clamping
- Through-holes for part ejection
- Hardened & wear-resistant finish
Drive
Slider
Precision-machined slider assembly with adjustable stroke length and shut height, guided by bronze-bushed gibs for accurate, repeatable ram travel under full tonnage.
- Adjustable shut height & stroke
- Bronze-bushed gib guides
- Rigid cast-iron construction
- Motorized slider adjustment available
Power Train
Crankshaft System
Forged alloy-steel crankshaft with heat-treated journals and precision bearings, delivering smooth rotary-to-linear motion conversion for consistent tonnage at bottom dead center.
- Forged alloy-steel construction
- Heat-treated bearing journals
- Dynamic balance for low vibration
- High fatigue-life design
Safety
Braking System
Combined clutch-brake unit with pneumatic engagement for rapid stopping within milliseconds, ensuring safe operation during single-stroke, continuous and inch modes.
- Pneumatic clutch-brake unit
- Fast response within 50 ms
- Long service-life friction discs
- 90° stopping angle guaranteed
Maintenance
Lubrication System
Automatic centralized lubrication system that delivers timed oil supply to all critical moving parts — crankshaft bearings, gib guides and connecting rod joints — reducing wear and extending machine life.
- Automatic timed oil delivery
- Centralized distribution manifold
- Low-oil-level alarm protection
- Reduces manual maintenance
Safety
Emergency Stop Switch
Strategically positioned mushroom-head emergency stop buttons that instantly cut power and engage the brake, bringing the slide to a complete stop for operator protection.
- Mushroom-head push-button design
- Multiple positions around the press
- Instant power cutoff & brake engage
- CE / ISO 13849 compliant
How It Works
4-Step Stamping Workflow
From flat sheet metal to precision-formed parts — the inclinable power press delivers fast, repeatable forming with gravity-assisted ejection for uninterrupted high-volume production.
1
Material Feed
Coil or blank fed manually or via automatic feeder. Control system synchronizes feed length with stroke cycle.
2
Press & Form
Clutch engages, crankshaft drives the slide through the forming stroke with full rated tonnage at bottom dead center.
3
Eject & Clear
Knockout bar ejects the part; with the frame inclined, parts and scrap fall by gravity into the collection bin below.
4
Repeat Cycle
In continuous mode the cycle repeats at full SPM with no manual clearing. Stroke counter and tonnage monitor track production.
Stamping Capabilities
Processes & Sample Parts
From precision electronic terminals to structural brackets, from blanking washers to deep-drawn cups — see the versatility and forming quality achievable with the KAVDO inclinable power press.
Tube Bending
Precision bending of round, square and rectangular tubes for handrails, furniture frames, exhaust systems and hydraulic pipelines with consistent bend radius and minimal deformation.
Shearing
Straight-line cutting of metal sheets and plates to required dimensions with clean edges and tight tolerances, providing accurate blanks for downstream forming processes.
Plate Bending
Rolling and forming of metal plates into cylinders, cones and curved sections for tanks, vessels, ductwork and structural components across various thicknesses.
Press Fitting
Force-fitting bearings, bushings, pins and shafts into housings with controlled tonnage, ensuring reliable interference fits for mechanical assemblies and structural joints.
Riveting
Permanent fastening of sheet metal assemblies, brackets and panels using solid, semi-tubular or self-piercing rivets with consistent clinch quality and joint strength.
Punching
High-speed hole punching, slotting and perforating of metal sheets for ventilation panels, cable trays, electrical enclosures and decorative screens with precise positioning.
Extrusion Molding
Continuous forming of aluminum and metal profiles through precision dies for window frames, curtain wall mullions, heat sinks and custom architectural sections.
Marking
Permanent marking of serial numbers, logos, barcodes and traceability codes on metal parts using stamping, engraving or embossing for product identification and quality tracking.
Applications
Industries We Serve
From automotive parts production to consumer electronics manufacturing, from hardware factories to electrical appliance assembly — the KAVDO inclinable power press delivers reliable high-speed stamping across every sector of the metalworking industry.
Why KAVDO
Your Trusted Manufacturing Partner
Beyond machines — we deliver complete stamping solutions including pre-sales engineering consultation, die compatibility assessment, installation commissioning, operator training and lifelong after-sales support.
Factory Direct Price
Buy directly from our own factory — no middlemen. Competitive pricing with transparent quotation and no hidden costs. Bulk order discounts and complete stamping line packages available.
Engineering Support
Dedicated project engineer reviews your stamping requirements, recommends the optimal press model and tonnage, and provides die compatibility assessment and production line layout guidance.
Global Shipping
Professional heavy equipment export packing with anti-rust treatment, fumigation certificate and transport insurance. Full container or LCL shipping to any port worldwide with door-to-door service available.
Lifetime Support
Remote video troubleshooting, spare parts supply within 48 hours, on-site installation commissioning, operator training and optional annual maintenance contract for the entire life of the machine.
Get Started
Start Your Project with KAVDO Today
Get professional advice and competitive pricing within 24 hours. Tell us about your requirements and our team will prepare a tailored solution for you.
- Response within 24 hours
- Free technical consultation & quotation
- Serving 80+ countries worldwide
Request a Quote
Fill in the form below and we'll get back to you shortly.