Press Brake Series
All-Electric Servo Press Brake
Zero hydraulic oil. Maximum precision. The KAVDO Electric Press Brake is powered entirely by high-torque AC servo motors and precision ball screws — delivering ultra-accurate bending with up to 80% energy savings and a clean, quiet workshop environment.
- 25T – 200T Bending Force
- ±0.005 mm Repeatability
- Up to 80% Energy Savings
- 1000 – 4000 mm Length
Eco-Friendly
15+
Years Experience
80+
Countries Served
5000+
Machines Delivered
CE&ISO
Certified Quality
Product Overview
Pure Electric Drive. Unmatched Precision.
The KAVDO All-Electric Servo Press Brake replaces hydraulic systems with high-torque AC servo motors driving precision ball screws, achieving ±0.005 mm repeatability. No oil, no heat, no leaks — up to 80% energy savings with a cleaner, quieter operation.
- 100% electric servo drive — zero hydraulic oil required
- Precision ball screw transmission with ±0.005 mm accuracy
- Up to 80% lower energy consumption vs. hydraulic models
- Ultra-low noise level below 65 dB during operation
- Near-zero maintenance — no oil changes, no filter replacements
Why Go Electric
Key Advantages
The electric press brake redefines what’s possible — combining extreme precision, minimal energy use and a maintenance-free design in a single machine.
±0.005 mm Repeatability
Servo motors with high-resolution encoders and zero-backlash ball screws deliver positioning accuracy five times greater than conventional hydraulic press brakes — eliminating trial bends and scrap.
80% Energy Savings
Servo motors consume power only during actual bending movement and stay idle between cycles. Compared to hydraulic systems that run continuously, this reduces electricity costs by up to 80%.
Ultra-Low Noise
Operating noise below 65 dB — quieter than a normal conversation. No hydraulic pump drone means a significantly more comfortable and safer working environment for operators.
Rapid Cycle Times
Servo motors deliver instant torque response with approach speeds up to 250 mm/s and rapid return speeds. Combined with zero warm-up time, overall cycle productivity increases by 20–30%.
Near-Zero Maintenance
No hydraulic oil to replace, no filters to change, no seals to wear out, no oil temperature issues. The all-electric design cuts annual maintenance costs by over 90% and virtually eliminates unplanned downtime.
Clean & Safe Operation
No hydraulic oil means no leaks, no contamination risk and no fire hazard — ideal for cleanroom-adjacent, food-grade and precision electronics manufacturing environments. CE certified.
Ready to Eliminate Hydraulic Oil From Your Workshop?
Our engineers will help you select the right electric press brake model and configuration for your specific bending requirements.
Technical Data
Specifications
Available in a focused range of tonnages and working lengths optimized for precision sheet metal forming applications.
| Model | 35T/1250 | 45T/1600 | 70T/2500 | 100T/3200 |
|---|---|---|---|---|
| Bending Force (kN) | 350 | 450 | 700 | 1000 |
| Bending Length (mm) | 1250 | 1600 | 2500 | 3200 |
| Columns Distance (mm) | 1130 | 1380 | 2000 | 2800 |
| Throat Depth (mm) | 300 | 300 | 400 | 400 |
| Daylight (mm) | 420 | 420 | 500 | 500 |
| Front Support (set) | 2 | 2 | 2 | 2 |
| Y Axis Servo Motor (kW) | 7.5×2 | 7.5×2 | 15×2 | 30×2 |
| Y-axis Stroke (mm) | 140 | 140 | 200 | 200 |
| X-axis Stroke (mm) | 500 | 500 | 500 | 500 |
| R-axis Stroke (mm) | 140 | 140 | 140 | 140 |
| Z1/Z2-axis Stroke (mm) | 400 | 600 | 600 | 600 |
| Y-axis Down Speed (mm/s) | 250 | 250 | 160 | 160 |
| Y-axis Return Speed (mm/s) | 250 | 250 | 160 | 160 |
| Y-axis Working Speed (mm/s) | 50 | 50 | 50 | 50 |
| X-axis Moving Speed (mm/s) | 500 | 500 | 500 | 500 |
| R-axis Moving Speed (mm/s) | 200 | 200 | 200 | 200 |
| Z1/Z2-axis Moving Speed (mm/s) | 400 | 400 | 400 | 400 |
| Y-axis Accuracy (mm) | ±0.01 | ±0.01 | ±0.01 | ±0.01 |
| X-axis Accuracy (mm) | ±0.02 | ±0.02 | ±0.02 | ±0.02 |
| R-axis Accuracy (mm) | ±0.1 | ±0.1 | ±0.1 | ±0.1 |
| Z1/Z2-axis Accuracy (mm) | ±0.1 | ±0.1 | ±0.1 | ±0.1 |
| Dimension (mm) | 1450×1300×2380 | 1700×1300×2430 | 2500×1600×2840 | 3200×1700×2920 |
| Weight (kg) | 2000 | 2500 | 4000 | 6500 |
* Custom configurations available on request. Actual energy savings depend on workload and duty cycle. Contact our team for tailored specifications.
Core Components
Machine Structure
A fundamentally different architecture — replacing hydraulic cylinders with precision servo-driven ball screws for unmatched accuracy and simplicity.
-
1
Rigid Steel Frame
FEA-optimized welded steel frame with stress relief treatment provides maximum rigidity with minimal weight for outstanding precision.
-
2
AC Servo Motors
Dual high-torque AC servo motors with absolute encoders provide instant torque response, precise speed control and zero drift over time.
-
3
Precision Ball Screws
C3-grade ground ball screws with preloaded nuts deliver zero-backlash linear motion, converting servo rotation to ram movement with 95%+ efficiency.
-
4
Timing Belt Synchronization
High-strength timing belt system mechanically links the dual ball screws to guarantee perfect left-right synchronization at all speeds.
-
5
CNC Backgauge System
Servo-driven multi-axis backgauge with ball screw transmission and linear guide rails for fast, accurate workpiece positioning.
Customize Your Machine
Optional Equipment
Configure your electric press brake with precision accessories to optimize it for your specific sheet metal forming applications.
Controller
CNC Controller Upgrade
Choose from a range of advanced CNC controllers with touchscreen interfaces, 3D bend simulation and offline programming capabilities.
- DA-53T (standard) / DA-66T / DA-69T
- ESA S660 / S670 available
- Cybelec VisiTouch option
- 3D simulation & collision detection
Tooling
Precision Tooling Sets
High-accuracy segmented tooling designed to fully exploit the electric press brake’s precision advantage for tight-tolerance bending work.
- Wila / Amada / Promecam style
- Quick-clamp hydraulic holders
- Precision-ground segmented tooling
- 42CrMo heat-treated steel
Safety
Laser Safety System
Advanced laser-based finger protection that follows the punch tip dynamically, enabling safe high-speed operation without sacrificing cycle time.
- DSP laser protection (FIESSLER / SICK)
- Dynamic speed switching
- No muting zone required
- EN 12622 compliant
Precision
Angle Measurement System
Real-time laser or tactile angle measurement built into the lower die for live feedback and automatic springback compensation on the first bend.
- Laser / tactile sensor options
- Real-time angle readout on screen
- Auto springback compensation
- Eliminates trial bends completely
Material Handling
Front Support Arms
Adjustable front sheet followers that move in sync with the ram to support large or heavy sheet metal during the bending process.
- Ball-bearing roller surface
- Height follows ram stroke
- Horizontal & vertical adjustment
- Rails along full working length
Automation
Robotic Integration
Ready-to-connect interface for robotic bending cell integration. The electric drive’s precise, repeatable positioning makes it ideal for automated production lines.
- Robot interface (Fieldbus / Ethernet)
- Automatic tool change ready
- Programmable I/O for cell control
- Compatible with major robot brands
Applications
Industries We Serve
The electric press brake excels in precision-demanding industries where accuracy, cleanliness and energy efficiency are paramount.
Comparison
Electric vs. Hydraulic Press Brake
Understand the advantages of going all-electric versus traditional hydraulic systems. Both are built by KAVDO with the same quality standards.
Recommended For Precision Work
Electric Press Brake
Maximum precision, minimum footprint
- ±0.005 mm repeatability — 5× more accurate
- Up to 80% energy savings vs. hydraulic
- Zero hydraulic oil — clean, green operation
- Near-zero maintenance cost — no oil, no filters
- Ultra-low noise below 65 dB
- Ideal for automation & robotic cell integration
Electro-Hydraulic Press Brake
High tonnage for heavy-duty bending
- Available up to 1000T for thick plate bending
- Working lengths up to 8000 mm
- ±0.01 mm repeatability with servo valves
- Lower upfront cost for larger tonnages
- Mature technology with wide service network
- Best for heavy structural & thick plate work
Why KAVDO
Your Trusted Manufacturing Partner
Beyond machines — we provide complete pre-sales consultation, installation support, operator training and lifelong after-sales service.
Custom Configuration
Tonnage, length, controller and backgauge options tailored to your exact bending requirements.
Fast Response
Quotation within 24 hours. Dedicated project manager from order to delivery and installation.
Global Shipping
Full container or LCL shipping worldwide with professional wooden case packing and marine insurance.
Lifetime Support
Remote video troubleshooting, spare parts supply and optional on-site engineer service for the life of the machine.
Get Started
Start Your Project with KAVDO Today
Get professional advice and competitive pricing within 24 hours. Tell us about your requirements and our team will prepare a tailored solution for you.
- Response within 24 hours
- Free technical consultation & quotation
- Serving 80+ countries worldwide
Request a Quote
Fill in the form below and we'll get back to you shortly.